Simple calorimetry to find the enthalpy of combustion of alcohols

Simple calorimetry to find the enthalpy of combustion of alcohols
Aims
You will use simple calorimetry estimate the enthalpy of combustion of an alcohol.
Apparatus

Goggles
Bench mat
Stand, boss, clamp
Thermometer
100cm3 measuring cylinder
Steel can
Digital balance
Access to spirit burners containing:
methanol, ethanol,
propanol or butanol


Method
1. Draw up a suitable table or tables to record your results.
2. Measure 100cm3 of water in the measuring cylinder.
Pour the water into the steel can and record its temperature.
3. Choose a spirit burner.
Record the name of the fuel, and the mass of the whole burner (including the lid and fuel inside).
4. Clamp the steel can, and set it up so that the spirit burner will fit comfortably under it.
5. Light the wick of the spirit burner, and put it under the steel can.
6. Stir the water gently with the thermometer, and watch the temperature.
When it has increased by 20°C, put the lid on the spirit burner to put the flame out.
Record the new mass of the whole burner (including the lid and fuel inside).
7. Using fresh water each time, repeat the experiment at least twice with the same fuel.

Analysis

1. Calculate the energy transferred to the water using the equation q = mcΔT
Assume that 1cm3 of water has a mass of 1g and c = 4.18 J g–1 K–1.
2. For each replicate experiment, perform the calculations described below:
a) Calculate the mass of fuel burnt.
b) Calculate the Mr of the fuel used. Use your answer to part a) to work out the amount of fuel burnt.
c) Work out the energy transferred to the water in kJ mol–1, and so the enthalpy of combustion.
3. Estimate the maximum errors in the using each piece of apparatus, and the total apparatus error.